making a bent plywood wall

display1_small.jpg

We made a new display wall to show our jewelry at ICFF this year out of bent plywood.  After making some sketches in Rhino, Jesse built a more rigorous model in CATIA.  The idea was to use the bend of the plywood to create both wall-like and shelf-like elements.  The 3-dimensional nature of the new Cell Cycle line meant that we needed flat surfaces to display pieces on, in addition to our usual hanging space.  Using CATIA allowed us very close control over how the surfaces curves were created so we could ensure the shelves were perfectly flat and sized for the pieces.

We used a CNC router to cut six 4’x4′ pieces of MDF into molds.  We decided to only make every other layer needed for the full thickness of the plywood which saved quite a bit of materials and machine time, but meant we spent hours screwing spacers on to the pieces.  The display is made up of 10 bent plywood strips, which means there were 10 molds, each with a male and female side.  We cut down 4’x8′ sheets of 1/40″ cherry veneer into strips of an appropriate size.  Then we layered six strips with epoxy resin glue using a foam roller.  The stack was then carefully put in between the two halves of the mold and 2-4 clamps were used to apply pressure over a 24 hour period.

display2_small.jpg

The next day, we removed the pieces from the molds, trimmed the top and bottom edge, and sanded everything.  For our first attempt at bent plywood, I think it came out very well!

You Might Also Like

  1. jim

    great idea and so perfectly executed… i have a bit of woodworking experience and love the fact that your craftsmanship extends into this realm also

  2. gilda

    i am obsessed. i wish i had the chance to learn how to make amazing things like this. and even more so, i want all your jewelry!! i’m gonna buy a couple of things from your store and see if i can use them as hardware in some of my clothes. i love them!!

  3. BROOKLYN/RENEGADE, PART 2: CRAFT SCENE. « Creative Envy

    […] it completely floored me. Wow. This is some major talent. They talk about how they did it on their blog. I didn’t pick up anything at the time, but I think I’m going to have to visit their […]

  4. Nicole

    I’m completely WOWED by your jewelry and now this! Especially so as I came from a building construction/architectural background, I appreciate all things sculptural. Superb job!

  5. BedBugsNYCc

    Needed to create you a little bit of remark in order to say thanks a lot once again relating to the wonderful things you have shown in this case. It was simply tremendously open-handed of you to offer extensively all most people would’ve sold as an electronic book in order to make some profit for themselves, primarily seeing that you could have done it in case you decided. These good ideas likewise acted like a great way to be certain that other people have similar desire similar to mine to learn lots more when considering this problem. Certainly there are thousands of more pleasurable times up front for many who look over your website.